Stainless-steel Lift Table – Buying Guide

Stainless Steel Lift Tables are generally used in food processing environments, or locations where the lift will be washed down on a semi-regular basis. The stainless steel raise table will prevent rusting plus corrosion which would occur on a traditional spray painted lift table. Whilst stainless steel lift tables are one of the most expensive lift tables on the market, they pay big dividends when calculating the cost of replacing traditional lifts which will corrosion and pollute the clean area environment in wash down programs.

Guidelines for Choosing Stainless Steel Lift Dining tables

Here are some of the most important aspects you will have to know when purchasing a stainless steel lift table.

1 . The weight capacity: How much will your pallet of materials weight. It is a good idea to take your pallet weight and multiply that will by 1 . 5 to get a basic safety buffer on the lift tables lifting capacity.

2 . The stroke from the SS lift: How high would you like the pallet to be lifted. Generally a raised height of 24″ in order to 42″ will meet most ergonomic needs.

3. Here is more in regards to Hubtischwagen stop by our site.
Does the entire raise need to be stainless: Some SS lift tables have components which are not really constructed entirely from SS. This could lead to problems if the lift has been washed down on a frequent base.

4. How often will the particular SS lift cycle: If the lift will cycle more than 10x an hour or so, it might be a good idea to purchase a high duty cycle stainless steel lift.

5. What sort of controller will work best for the application: When the operator has to use their hands during the work process, then it might be a good idea to purchase a foot controller rather than hand controller. This will leave the particular operator’s hands free to perform their job.

Other important Considerations for Stainless Steel Lift Tables

When choosing a supplier for the SS lift table, it is a good idea to share as much information with the producer as possible. Walk them through the series of events that will take place as soon as the pallet is loaded onto the lift table, to the time that it is removed. For instance, they might suggest that you also purchase a rotating top system, which will prevent the operator from needing to reach across the pallet to gain entry to material on the opposite side.